Product Center
所有分类 >

Mineral Processing Additive Series

Phosphoric Acid Additive Series

Fertilizer Additives Series

Water Treatment Chemicals Series

Cleaning, Pre-filming

Scale And Corrosion Inhibitor/Dispersant

Sterilization And Algaecide

Other Specialty Auxiliaries

Scale And Corrosion Inhibitor/Dispersant

Cleaning pre-film, scale and corrosion inhibition, sterilization and algaecide, flocculation and sedimentation.
Efficacy: improve production process, improve production efficiency, reduce production costs.

Scale And Corrosion Inhibitor/Dispersant

Copper Corrosion Inhibitor for Power Plants (Q337)

This product is a new type of corrosion inhibitor synthesized from benzotriazole and organic amines. It is widely used in the industrial water treatment industry. In circulating cooling water systems, this product is one of the most effective corrosion inhibitors for copper, copper alloys, and aluminum alloys, commonly used in the circulating cooling water systems of thermal power plants. Adding this product to the circulating cooling water systems of ammonia synthesis plants also has a good anti-corrosion effect.

More details

Here is the placeholder text

Phosphate-free scale inhibitor for reverse osmosis (Q336W)

This product is an efficient liquid scale inhibitor/dispersant for reverse osmosis membrane systems, phosphate-free, used to control the scaling and precipitation of carbonates, sulfates, silicates, fluorides, and iron-aluminum oxides in membrane separation systems. It effectively controls the scaling of calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, silicates, etc., on the membrane surface, with sufficient dispersing ability to disperse blocking particles on the membrane surface; suitable for all membranes; effective over a wide pH range; compatible with aluminum and iron oxides in the feed water; can be added directly or diluted; suitable for different water sources. Using this scale inhibitor can extend the system cleaning cycle and membrane life, reducing operating costs.

More details

Here is the placeholder text

Reverse osmosis special scale inhibitor dispersant (Q336)

This product is an efficient liquid scale inhibitor/dispersant used to control scaling caused by the precipitation of silicates, carbonates, sulfates, and iron oxides in membrane separation systems. It effectively controls scaling of silicates, calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, etc., and has sufficient dispersing ability to disperse blocking particles on the membrane surface; it is suitable for all membranes; effective over a wide range of feed water pH; compatible with aluminum and iron oxides in the feed water; can be added directly or diluted for addition. Suitable for different water sources. Using this scale inhibitor/dispersant can extend the system cleaning cycle, prolong membrane life, and reduce operating costs.

More details

Here is the placeholder text

Phosphorus-free scale and corrosion inhibitor (Q397)

This product is phosphorus-free, which can greatly reduce wastewater treatment costs in areas with strict phosphorus discharge requirements. Being phosphorus-free helps to reduce the proliferation of microorganisms in the circulating water system. It is mainly used for scale and corrosion control treatment in open-loop cooling water systems.

More details

Here is the placeholder text

Oilfield water injection scale inhibitor and corrosion inhibitor (Q335)

This product is a new type of scale inhibitor and corrosion inhibitor developed specifically for oil field water injection. It is suitable for scale inhibition and corrosion inhibition in oil field water injection pipelines with high mineralization and high chloride ions. The corrosion inhibition rate for carbon steel reaches 95%, and the scale inhibition rate reaches 98%, with no pollution to the environment.

More details

Here is the placeholder text

Power Plant Circulating Water Scale Inhibitor and Corrosion Inhibitor (Q334)

This product is a fully organic scale inhibitor and corrosion inhibitor specifically designed for power plants, composed of a blend of multiple organic phosphonic acids, phosphonic acid copolymers, and copper corrosion inhibitors. It has special dispersing properties for various types of scale; the copper corrosion inhibitor can form a dense protective film on the surface of the equipment, thereby slowing down the corrosion rate.

More details

Here is the placeholder text

Water Softening Scale Inhibitor and Corrosion Inhibitor (Q333)

This product is mainly composed of efficient corrosion inhibitors, dispersants, and copper corrosion inhibitors. It has excellent corrosion inhibition effects on carbon steel, copper materials, and stainless steel in softened water or desalinated water, and also has scale inhibition effects.

More details

Here is the placeholder text

Low Hardness Water Scale Inhibitor and Corrosion Inhibitor (Q313)

This product is a scale inhibitor and corrosion inhibitor specially designed for low hardness water. It is non-toxic and will not cause secondary pollution to water bodies. It is mainly applied to circulating water with 2+ Ca (calculated as CaCO3) less than 50mg/L, with a dosage concentration of 50~100mg/L, resulting in a corrosion rate of carbon steel lower than 0.075mm/a and a fouling attachment rate of less than 15mcm.

More details

Here is the placeholder text

Hard Water Scale Inhibitor and Corrosion Inhibitor (Q331A)

This product is composed of organic polyphosphonic acid, high-efficiency polyphosphate, and a blend of additives, featuring scale inhibition, dispersion, and corrosion inhibition properties. It is suitable for industrial circulating water with high hardness and high alkalinity, and does not require acid to adjust the pH value.

More details

Here is the placeholder text

High Hardness Water Scale Inhibitor and Corrosion Inhibitor (Q331)

This product is composed of organic polyphosphonic acid, polyphosphate, and additives, belonging to a fully organic formulation. It has both scale inhibition, dispersion, and corrosion inhibition properties. It is suitable for industrial circulating water with high hardness and high alkalinity, and does not require acid to adjust the pH value.

More details

Here is the placeholder text

Scale Inhibitor and Corrosion Inhibitor (Q320)

This product is a fully organic formulation composed of organic phosphonic acid, sulfonic acid copolymers, and corrosion inhibitors. It is resistant to high temperatures, with a characteristic of not decomposing at 250°C. In circulating water with carbonate hardness of 100~600 mg/L (calculated as CaCO3), the corrosion rate of carbon steel is less than 0.075 mm/a, and the fouling thermal resistance value is less than 2.0×10·K/W. This product is widely used in industrial circulating water in fertilizer plants, chemical plants, refineries, steel mills, oxygen generators, central air conditioning units, and as a scale inhibitor and corrosion inhibitor in oilfield water injection.

More details

Here is the placeholder text

< 1 >
Wuhan Qiangsheng Technology Co., Ltd.

Need help? Call us on 86-027-88121959

Adhere to the goal of "energy saving and improving quality and efficiency for customers", continuously integrate resources, fully research new technologies, develop new products, improve core competitiveness, and continue to improve service level and quality.

Wuhan Qiangsheng Technology Co., Ltd.

Tel: 86-027-88121959

E-mail: whqskjxs@163.com

Address: No.59 Jiangxia Avenue, Miaoshan High-tech Industrial Park, Jiangxia Economic Development Zone, Wuhan City

More →
WeChat Public Number

WeChat

All rights reserved©Wuhan Qiangsheng Technology Co., Ltd.

Powered by www.300.cn

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.