Reverse osmosis special scale inhibitor dispersant (Q336)

This product is an efficient liquid scale inhibitor/dispersant used to control scaling caused by the precipitation of silicates, carbonates, sulfates, and iron oxides in membrane separation systems. It effectively controls scaling of silicates, calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, etc., and has sufficient dispersing ability to disperse blocking particles on the membrane surface; it is suitable for all membranes; effective over a wide range of feed water pH; compatible with aluminum and iron oxides in the feed water; can be added directly or diluted for addition. Suitable for different water sources. Using this scale inhibitor/dispersant can extend the system cleaning cycle, prolong membrane life, and reduce operating costs.

Product Description

1. Performance and Applications

  This product is an efficient liquid scale inhibitor/dispersant used to control scaling caused by the precipitation of silicates, carbonates, sulfates, and iron oxides in membrane separation systems. It effectively controls scaling of silicates, calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, etc., and has sufficient dispersing ability to disperse blocking particles on the membrane surface; suitable for all membranes; effective over a wide range of feed water pH; compatible with aluminum and iron oxides in the feed water; can be added directly or diluted. Suitable for different water sources. Using this scale inhibitor/dispersant can extend the system cleaning cycle, prolong membrane life, and reduce operating costs.

 

2. Quality Indicators

Indicator Name

Indicator Requirements

Appearance

Colorless or lightYellow liquid

Density (20℃•g/cm³)

>1.0

pH Value (1% aqueous solution)

Alkaline or acidic

 

3. Usage Method

  Dosage Point: To achieve maximum effectiveness, it is best to add before the mixer or security filter.
  Dosage: Calculate a reference dosage based on the salinity, temperature, and recovery rate of the feed water, and then determine a suitable dosage based on specific water system conditions.
  Dilution: Can be added directly or diluted, dilution should use desalinated water, and the dilution ratio should not exceed 10.

 

4. Packaging and Storage

  Packaged in 5~25kg barrels or according to user requirements. Valid for 10 months.

Scale And Corrosion Inhibitor/Dispersant

water

membrane

Related Product Series

Welcome your product consultation