Special disinfectant for reverse osmosis membrane (Q599D)

This product is a broad-spectrum biological inhibitor that can quickly exert a bactericidal effect. As a maintenance measure for biological control solutions, it is mainly applied in reverse osmosis systems troubled by biological contamination. It is added during normal operation. The frequency of dosing can be determined after standardized research on system performance, taking into account the biological activity of the influent, effluent, and permeate water. This product is widely used for microbial control in reverse osmosis systems.

Product Description

1. Performance and Applications

  This product is a broad-spectrum biological inhibitor that can quickly exert a bactericidal effect. As a maintenance measure for biological control solutions, it is mainly applied in reverse osmosis systems troubled by biological contamination. It is added during normal operation. The frequency of dosing can be determined after standardized research on system performance, taking into account the biological activity of the influent, effluent, and permeate water. This product is widely used for microbial control in reverse osmosis systems.

 

2. Quality Indicators

Indicator Name

Indicator Requirements

Appearance

Colorless to light amber liquid

pH value (1% aqueous solution)

≤5.0

Density (20℃·g/cm³)

>=1.10

Effective Content (%)

>=20.0

 

3. Usage Method

  When used as a water treatment sludge stripping agent, the dosing concentration is 100~200mg/L. When used as a bactericide in circulating cooling water systems, it is dosed at 50~100mg/L based on the retained water volume. For membrane pollution control:
  Intermittent Dosing: For systems with not very serious biological contamination, dosing once a week for 2~3 hours at a concentration of 100ppm is recommended. If the total bacterial count in the influent is >100CFU/ml or if a biofilm has definitely formed in the reverse osmosis system, it is recommended to dose at a concentration of 150ppm for 3~5 hours.
  Continuous Dosing: When it is desired that no obvious biofilm appears in the system, a continuous dosing scheme can be adopted, with a recommended dosing concentration of 3~8ppm (the actual dosage should be adjusted according to the normal fluctuations in bacterial content).

 

4. Packaging and Storage

  Packaged in 25Kg/200Kg plastic barrels: prevent exposure to sunlight and rain during transportation; store in a ventilated, dry place below 40℃; avoid freezing, heating, or direct sunlight; product shelf life is 6 months.

Sterilization And Algaecide

biological

osmosis

Related Product Series

Welcome your product consultation